 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| TF Series Fast tr High Performance 20 Section 10-Tap 28-Pin Delay Lines TF Schematic Diagram COM 28 27 26 25 24 23 22 21 20 19 18 17 Fast Rise Time ( td / tr High Bandwidth 10 ) 0.35 / tr Low Distortion LC Network 10 Equal Delay Taps Standard Impedances: 50 - 75 - 100 - 200 Stable Delay vs. Temperature: 100 ppm/OC Operating Temperature Range -55OC to +125OC Dimensions in Inches (mm) COM 16 15 1.450 (36.83) MAX. .030 .275 (0.76) (6.99) TYP. MAX. .120 (3.05) MIN. .050 (1.27) TYP. .020 (0.51) TYP. .100 (2.54) TYP. .320 (8.13) .290 (7.37) .300 (7.62) MAX. 1 IN 2 3 4 5 6 7 8 9 10 11 12 13 14 .010 (0.25) TYP. .350 (8.89) .310 (7.87) 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% Electrical Specifications at 25OC Delay Tolerances Total (ns) Tap-to-Tap (ns) 1, 2, 3 (Refer to Operating Specifications for Passive Delays page 2.) Rise Time (ns) DCR max. (Ohms) 75 Ohm Part Number Rise Time (ns) DCR max. (Ohms) 100 Ohm Part Number Rise Time (ns) DCR max. (Ohms) 50 Ohm Part Number 50 2.5 75 3.7 80 4.0 100 5.0 120 6.0 150 15.0 200 10.0 250 12.5 300 15.0 400 20.0 500 25.0 5.0 1.0 7.5 2.0 8.0 2.0 10.0 2.0 12.0 2.0 15.0 2.5 20.0 3.0 25.0 3.0 30.0 3.5 40.0 4.0 50.0 5.0 TF50-5 TF75-5 TF80-5 TF100-5 TF120-5 TF150-5 TF200-5 TF250-5 TF300-5 TF400-5 TF500-5 6.2 9.2 9.5 11.2 13.4 15.7 21.3 27.2 31.1 41.0 50.8 1.9 2.1 2.2 2.3 2.3 2.4 2.5 2.6 2.7 2.8 2.9 TF50-7 TF75-7 TF80-7 TF100-7 TF120-7 TF150-7 TF200-7 TF250-7 TF300-7 TF400-7 TF500-7 6.2 9.2 9.6 11.7 13.7 16.1 21.5 27.3 31.4 41.3 53.1 2.0 2.2 2.3 2.5 2.7 3.1 3.3 3.5 3.6 3.7 3.9 TF50-10 TF75-10 TF80-10 TF100-10 TF120-10 TF150-10 TF200-10 TF250-10 TF300-10 TF400-10 TF500-10 6.4 9.4 9.9 12.5 13.8 16.4 21.6 27.5 32.3 41.7 54.2 2.2 2.3 2.4 2.7 3.1 3.5 3.8 4.3 4.6 4.8 5.1 Multi-Line Delay Modules 5 Independent Lines can be Cascaded to Achieve Wide Range of Delays Applications include Video & Test Equipment Standard Impedances: 50 - 75 - 100 Stable Delay vs. Temperature: 100 ppm/OC Operating Temperature Range -55 C to +125 C Electrical Specifications at 25OC Multi-Line Passive P/N 1, 2, 3 OUT 1 14 13 OUT 2 12 OUT 3 11 OUT 4 10 OUT 5 9 8 DLM5 Schematic Diagram 1 2 IN1 3 IN2 4 IN3 5 IN4 6 IN5 7 COM O O COM (Refer to Operating Specifications for Passive Delays page 2.) Line 2 (ns) Pin 3 to Pin 12 Line 3 (ns) Pin 4 to Pin 11 Line 4 (ns) Pin 5 to Pin 10 Line 5 (ns) Pin 6 to Pin 9 Nominal Nominal DCR max. Line 1 (ns) Combined Impedance (Ohms) Pin 2 to Pin 13 Delay DLM5-1555 50 155 1.2 80 4.0 40 2.0 DLM5-785 50 77.5 1.1 40 2.0 20 1.0 DLM5-395 50 38.5 0.9 20 1.0 10 1.0 DLM5-1557 75 155 1.3 80 4.0 40 2.0 DLM5-787 75 77.5 1.2 40 2.0 20 1.0 DLM5-397 75 38.5 1.0 20 1.0 10 1.0 DLM5-1551 100 155 1.8 80 4.0 40 2.0 DLM5-781 100 77.5 1.7 40 2.0 20 1.0 DLM5-391 100 38.5 1.5 20 1.0 10 1.0 1. Rise Times are measured from 10% to 90% points. 2. Delay Times measured at 50% points of leading edge. 3. Output (100% Tap) terminated through ZO to ground. Specifications subject to change without notice. 20 1.0 10 1.0 5.0 0.5 20 1.0 10 1.0 5.0 0.5 20 1.0 10 1.0 5.0 0.5 10 1.0 5.0 0.5 2.5 0.5 10 1.0 5.0 0.5 2.5 0.5 10 1.0 5.0 0.5 2.5 0.5 5.0 0.5 2.5 0.5 1.0 0.4 5.0 0.5 2.5 0.5 1.0 0.4 5.0 0.5 2.5 0.5 1.0 0.4 .300" Wide DIP 14 Pin Package Detailed Drawing. See pg. 9 (TZB type) D14-300 For other values & Custom Designs, contact factory. 10 DLM_TF 1/98 Rhombus Industries Inc. 15801 Chemical Lane, Huntington Beach, CA 92649-1595 Tel: (714) 898-0960 * Fax: (714) 896-0971 |
Price & Availability of TF200-5
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |